Russian to English translationShow romanization
I'll show you now.
My replication installation Kapanadze.
How would it not look funny
As a grounding, I used the heating system, as all the pipes grounded
Principle the can assume that this is a good grounding.
Then I use the computer a couple vitro UDP5. All lines are closed, twisted together. And connected to the pipe.
It is desirable to have a good contact. Pliers wrap.
Furthermore, this lead me goes to install itself. Here's the output transformer. I must say, is made on the core feromagnitnom
to avoid mistaken people. But then again, some will build an oscillating circuit.
To start the installation I wanted to try it with batteries but, unfortunately, it is in my village.
Not enough power to run
I'm using now to run wires from an external power source. My lab power supply.
Run. Now we have 12 volt power is supplied to the incoming wire.
Then the system was. Charging capacitance 4700uF and serves to start the system.
I have provided two buttons. This start and stop. But I'm here a little nakosyachil and my feet did not work.
Now run the system. Instant goes. And as we see, the fan rotates. And two large power transistors.
And our favorite curve.
Installation produces, so I plugged 150vat bulb. While I do not get done. It's in the future.
We can now safely turn off the external source. And the wires to short to show all that is gone. Clear tank.
The system further works.
As you can see the arc.
And switched off the power supply.
Ie you can see that the lamp is lit.
Ie there passes a ground wire. I can take, I was shock, do not hit at all desire as some of the Internet.
Well, ie principle the here as I said installation is not complicated.
This transistor is used to generate Ie is a high-voltage transformer and the transformer that generates the arc. Ie no arc, and high voltage.
Well, you see the arc is not strong. She should not be powerful.
Ie it vsevolish stimulates the process defined in feromagnitnom core.
Further, all connected. It is a 20 watt transformer below.
Which is powered from the output of the coil.
This is one of the transformer and they have energized lamp.
Ie at the moment we see power 150 watt.
Now I have burns, and a piece of paper.
And washing herself from this transformer at the transformer.
And the result is development of free energy. Can say so.
So now I can not stop. It must be closed. Otherwise, now everything will burn.
And it burns very strongly.
So stop the system. Blin not locked.
Always think of how to make the system stop.
Since the rear. And discharged the capacitor, which is in the system.
So now emptied. Installing now will not start. As you can see, the lamp really hot.
Now that. Well, opens. I will show that this is not the focus.
Run. Do not run.
To start the system again to use an external power source.
So now press the pause. Podkruchu. So I connected the wires.
Turn the power supply.
Here we go 12volt power. Current of 1 ampere.
Ie to start here you can use any battery.
To start the thing to charge the capacitor 4700uF
In principle, this charge will be enough power to run the system.
It'll start the system.
System start his.
Arc all as expected.
The lamp is lit. Together with the housing.
Turning off the power supply external.
Turning off the wire.
They tell us no longer needed.
Hm. Well lit.
Well, that's all. I will fight the fire.
All for now.